All MIBs › ACC-MIB › accIpIfFiltDispOp2
accIpIfFiltDispOp2
Module: ACC-MIB
OID (symbolic): ACC-MIB::accIpIfFiltDispOp2
OID (numeric): 1.3.6.1.4.1.5.1.1.18.5.1.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
Logical operation to be performed on the next object/parameter (port).
What is accIpIfFiltDispOp2?
This read-only OID displays the logical operator (equals, not equals, less than, or greater than) applied to port numbers in a filter rule. Engineers monitor this to understand port-matching logic and whether the filter targets a specific port or a range of ports. If set to 'less than,' the filter might match all ports below 1024, affecting system and privileged services.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.5.1.10 snmpwalk -v2c -c public <target> ACC-MIB::accIpIfFiltDispOp2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.5.1.10.1 snmpget -v2c -c public <target> ACC-MIB::accIpIfFiltDispOp2.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.18 | accIpFilter | ACC-IPFILTER |
| 1.3.6.1.4.1.5.1.1.18.5 | accIpIfFiltDispTable | ACC-IPFILTER |
| 1.3.6.1.4.1.5.1.1.18.5.1 | accIpIfFiltDispEntry | ACC-IPFILTER |
| 1.3.6.1.4.1.5.1.1.18.5.1.10 | accIpIfFiltDispOp2 | ACC-MIB |