ACC-MIB :: accIpFiltDNetMask

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-MIBaccIpFiltDNetMask

accIpFiltDNetMask

Module: ACC-MIB

OID (symbolic): ACC-MIB::accIpFiltDNetMask

OID (numeric): 1.3.6.1.4.1.5.1.1.18.2.1.2

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: Destination Network Mask

What is accIpFiltDNetMask?

This OID stores the network mask paired with the destination IP filter to specify a subnet range instead of a single host address. Engineers use this alongside the destination address to create rules that apply to entire subnets, allowing a single filter to cover many destination IPs. A value of 255.255.255.0 means the filter applies to a /24 subnet, covering 256 destination addresses.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.2.1.2
snmpwalk -v2c -c public <target> ACC-MIB::accIpFiltDNetMask

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.2.1.2.1
snmpget -v2c -c public <target> ACC-MIB::accIpFiltDNetMask.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.18.2.1.2.1 a <value>

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-MIB::accIpFiltDNetMask OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5.1.1.18accIpFilterACC-IPFILTER
1.3.6.1.4.1.5.1.1.18.2accIpFiltTableACC-IPFILTER
1.3.6.1.4.1.5.1.1.18.2.1accIpFiltEntryACC-IPFILTER
Numeric OIDNameModule
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
1.3.6.1.4.1.5.1.1.18.2.1.2accIpFiltDNetMaskACC-MIB