All MIBs › ACC-MIB › accFrDlcmiPollInt
accFrDlcmiPollInt
Module: ACC-MIB
OID (symbolic): ACC-MIB::accFrDlcmiPollInt
OID (numeric): 1.3.6.1.4.1.5.1.1.20.3.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
the number of seconds between successive status enquiry messages.
What is accFrDlcmiPollInt?
This parameter sets the interval in seconds (5 to 30) between DLCMI status enquiry messages the device sends to verify circuit health. Network engineers tune this to balance responsiveness with overhead; shorter intervals catch failures faster but consume more bandwidth and CPU. A setting of 10 seconds means the device sends a status check every 10 seconds to verify all DLCIs remain active.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.3.1.6 snmpwalk -v2c -c public <target> ACC-MIB::accFrDlcmiPollInt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.3.1.6.1 snmpget -v2c -c public <target> ACC-MIB::accFrDlcmiPollInt.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.20.3.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.20 | accFr | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.3 | accFrParmTable | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.3.1 | accFrParmEntry | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.3.1.6 | accFrDlcmiPollInt | ACC-MIB |