ACC-MIB :: accEnetStatCRCErrs

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-MIBaccEnetStatCRCErrs

accEnetStatCRCErrs

Module: ACC-MIB

OID (symbolic): ACC-MIB::accEnetStatCRCErrs

OID (numeric): 1.3.6.1.4.1.5.1.1.8.3.1.2

Node type: OBJECT-TYPE

Type: Counter

Access: read-only

Description: Number of CRC (Checksum) errors detected on this port.

What is accEnetStatCRCErrs?

This counter increments each time an Ethernet frame arrives with a CRC (Cyclic Redundancy Check) error, indicating checksum corruption. Rising CRC error counts often signal physical-layer problems such as loose cable connections, damaged cabling, or electromagnetic interference. Example: if this counter reaches 18, eighteen frames arrived with checksum corruption, suggesting cable or connector issues on that port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.8.3.1.2
snmpwalk -v2c -c public <target> ACC-MIB::accEnetStatCRCErrs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.8.3.1.2.1
snmpget -v2c -c public <target> ACC-MIB::accEnetStatCRCErrs.1

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-MIB::accEnetStatCRCErrs OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5.1.1.8accEnetACC-ENET
1.3.6.1.4.1.5.1.1.8.3accEnetStatTableACC-ENET
1.3.6.1.4.1.5.1.1.8.3.1accEnetStatEntryACC-ENET
Numeric OIDNameModule
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
1.3.6.1.4.1.5.1.1.8.3.1.2accEnetStatCRCErrsACC-MIB