All MIBs › ACC-MIB › accDownload
accDownload
Module: ACC-MIB
OID (symbolic): ACC-MIB::accDownload
OID (numeric): 1.3.6.1.4.1.5.1.1.27.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object to initiate causes the unit to load local EPROM with application code brought over the network from a file in the accRlSourceTable.
What is accDownload?
Setting this OID to initiate causes the device to download application code over the network and write it permanently to EPROM (flash memory). A network engineer uses this to update the device's permanent firmware image stored in non-volatile memory. For example, setting to initiate makes the device fetch code from the remote load table and store it in flash for the next boot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.27.3 snmpwalk -v2c -c public <target> ACC-MIB::accDownload
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.27.3.1 snmpget -v2c -c public <target> ACC-MIB::accDownload.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.27.3.1 i <value>
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-MIB::accDownload OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.27 | accRload | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.27.3 | accDownload | ACC-MIB |