All MIBs › ACC-MIB › accDialOrigIpDestAddr
accDialOrigIpDestAddr
Module: ACC-MIB
OID (symbolic): ACC-MIB::accDialOrigIpDestAddr
OID (numeric): 1.3.6.1.4.1.5.1.1.31.8.1.2
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description:
Destination address for this Ip entry in the dial originate database.
What is accDialOrigIpDestAddr?
ACC-MIB::accDialOrigIpDestAddr stores the destination IP address (data type: IP address) that the dial originate filter uses to match outgoing traffic. A network engineer configures this when setting up rules to trigger dial connections based on where the traffic is headed. For example, you might set this to 192.168.100.0 to mean 'when traffic tries to reach this IP address range, consider dialing out.' Example value: 10.0.0.5 would mean the filter matches traffic destined for that specific IP host.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.31.8.1.2 snmpwalk -v2c -c public <target> ACC-MIB::accDialOrigIpDestAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.31.8.1.2.1 snmpget -v2c -c public <target> ACC-MIB::accDialOrigIpDestAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.31.8.1.2.1 a <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.31 | accDial | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.31.8 | accDialOrigIpTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.31.8.1 | accDialOrigIpEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.31.8.1.2 | accDialOrigIpDestAddr | ACC-MIB |