All MIBs › ACC-MIB › accDialBackupRetry
accDialBackupRetry
Module: ACC-MIB
OID (symbolic): ACC-MIB::accDialBackupRetry
OID (numeric): 1.3.6.1.4.1.5.1.1.31.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The number of seconds the system will wait be- fore retrying a failed call.
What is accDialBackupRetry?
Sets how many seconds the system waits before attempting to reconnect if a dial backup call fails (range 0 to 3600 seconds). This prevents the system from continuously hammering a dead connection, which wastes bandwidth and resources. Setting this to 60 means 'wait 60 seconds after a failed call before trying again.'
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.31.1.1.4 snmpwalk -v2c -c public <target> ACC-MIB::accDialBackupRetry
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.31.1.1.4.1 snmpget -v2c -c public <target> ACC-MIB::accDialBackupRetry.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.31.1.1.4.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.31 | accDial | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.31.1 | accDialBackupTable | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.31.1.1 | accDialBackupEntry | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.31.1.1.4 | accDialBackupRetry | ACC-MIB |