All MIBs › ACC-MIB › accConfiguration
accConfiguration
Module: ACC-MIB
OID (symbolic): ACC-MIB::accConfiguration
OID (numeric): 1.3.6.1.4.1.5.1.1.1.1.7.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Set the action to perform on the active configuration. A set to load or default will immediately reset the unit. On the restart the new configuration (either a previously saved one or the default configuration) will be used.
What is accConfiguration?
This read-write OID allows an administrator to issue commands that affect how the device's running configuration is handled, such as loading a saved config or reverting to factory defaults. Setting this OID typically triggers an immediate device restart as the new configuration takes effect. For example, setting this to 'load' causes the device to reload the last saved configuration from NVM and reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.1.7.1 snmpwalk -v2c -c public <target> ACC-MIB::accConfiguration
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.1.1.7.1.1 snmpget -v2c -c public <target> ACC-MIB::accConfiguration.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.1.1.7.1.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1 | accSystem | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.1 | accSysInfo | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.1.7 | accSysConfigInfo | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.1.1.7.1 | accConfiguration | ACC-MIB |