All MIBs › ACC-MIB › accCompressPhysStatAvgCompIn
accCompressPhysStatAvgCompIn
Module: ACC-MIB
OID (symbolic): ACC-MIB::accCompressPhysStatAvgCompIn
OID (numeric): 1.3.6.1.4.1.5.1.1.6.7.1.9
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description:
The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
What is accCompressPhysStatAvgCompIn?
This gauge reports the average compression ratio for decompressed inbound traffic as a percentage (0-100%), where higher numbers mean tighter compression. A network engineer uses this to validate that inbound compression performance meets expectations and identify when compression stops being effective. A value of 65 indicates that inbound traffic achieved an average 65% compression ratio.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.6.7.1.9 snmpwalk -v2c -c public <target> ACC-MIB::accCompressPhysStatAvgCompIn
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.6.7.1.9.1 snmpget -v2c -c public <target> ACC-MIB::accCompressPhysStatAvgCompIn.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.6 | accCompress | ACC-COMPRESS |
| 1.3.6.1.4.1.5.1.1.6.7 | accCompressPhysStatTable | ACC-COMPRESS |
| 1.3.6.1.4.1.5.1.1.6.7.1 | accCompressPhysStatEntry | ACC-COMPRESS |
| 1.3.6.1.4.1.5.1.1.6.7.1.9 | accCompressPhysStatAvgCompIn | ACC-MIB |