All MIBs › ACC-MIB › accCompressDialStatAvgCompOut
accCompressDialStatAvgCompOut
Module: ACC-MIB
OID (symbolic): ACC-MIB::accCompressDialStatAvgCompOut
OID (numeric): 1.3.6.1.4.1.5.1.1.6.4.1.11
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description:
The average compression rate of packets presented for compression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
What is accCompressDialStatAvgCompOut?
This gauge shows the average compression ratio for outgoing data as a percentage, indicating how much of the original size remains after compression. Engineers use this to decide whether compression should be enabled and to track compression effectiveness over time. A reading of 20% means your outgoing packets are compressed to just one-fifth of their original size.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.6.4.1.11 snmpwalk -v2c -c public <target> ACC-MIB::accCompressDialStatAvgCompOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.6.4.1.11.1 snmpget -v2c -c public <target> ACC-MIB::accCompressDialStatAvgCompOut.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.6 | accCompress | ACC-COMPRESS |
| 1.3.6.1.4.1.5.1.1.6.4 | accCompressDialStatTable | ACC-COMPRESS |
| 1.3.6.1.4.1.5.1.1.6.4.1 | accCompressDialStatEntry | ACC-COMPRESS |
| 1.3.6.1.4.1.5.1.1.6.4.1.11 | accCompressDialStatAvgCompOut | ACC-MIB |