All MIBs › ACC-MIB › accAtNetTabX25Addr1
accAtNetTabX25Addr1
Module: ACC-MIB
OID (symbolic): ACC-MIB::accAtNetTabX25Addr1
OID (numeric): 1.3.6.1.4.1.5.1.1.28.6.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description:
The normal DTE address to use for sending or receiving packets via an X.25 virtual circuit.
What is accAtNetTabX25Addr1?
This field stores the primary X.25 DTE (Data Terminal Equipment) address used to establish outbound calls and receive inbound calls on X.25 virtual circuits. Network engineers configure this address when connecting to an X.25 packet-switched network for wide-area networking. For instance, an address of '31415926' would be the X.25 identifier this device uses to establish connections with the X.25 switch.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.6.1.4 snmpwalk -v2c -c public <target> ACC-MIB::accAtNetTabX25Addr1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.6.1.4.1 snmpget -v2c -c public <target> ACC-MIB::accAtNetTabX25Addr1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.28.6.1.4.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.28 | accAt | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.6 | accAtNetTable | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.6.1 | accAtNetEntry | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.6.1.4 | accAtNetTabX25Addr1 | ACC-MIB |