ACC-LAPB :: accLapbT1Timer

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-LAPBaccLapbT1Timer

accLapbT1Timer

Module: ACC-LAPB

OID (symbolic): ACC-LAPB::accLapbT1Timer

OID (numeric): 1.3.6.1.4.1.5.1.1.7.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: T1 timer value (in milliseconds) for this interface.

What is accLapbT1Timer?

This OID sets how long (in milliseconds) the device waits for an acknowledgment from the remote device before timing out and retrying the transmission. Adjust this value on high-latency links if you see frequent timeouts; too low causes unnecessary retries, too high causes sluggish recovery. Setting this to 3000 means the device waits 3 seconds before assuming a frame was lost and resending it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.7.2.1.3
snmpwalk -v2c -c public <target> ACC-LAPB::accLapbT1Timer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.7.2.1.3.1
snmpget -v2c -c public <target> ACC-LAPB::accLapbT1Timer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.7.2.1.3.1 i <value>

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-LAPB::accLapbT1Timer OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5.1.1.7accLapbACC-LAPB
1.3.6.1.4.1.5.1.1.7.2accLapbParmTableACC-LAPB
1.3.6.1.4.1.5.1.1.7.2.1accLapbParmEntryACC-LAPB
1.3.6.1.4.1.5.1.1.7.2.1.3accLapbT1TimerACC-LAPB