All MIBs › ACC-LAPB › accHdlcRrPolling
accHdlcRrPolling
Module: ACC-LAPB
OID (symbolic): ACC-LAPB::accHdlcRrPolling
OID (numeric): 1.3.6.1.4.1.5.1.1.7.2.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
T3 Timer.
What is accHdlcRrPolling?
This OID sets the T3 timer (also called the polling or RR timer) that controls how often the device sends status checks to the remote device when no data is flowing. Configure this to keep the link active and detect dead connections; too short creates unnecessary traffic, too long delays failure detection. A value of 30000 means the device sends a polling status frame every 30 seconds if no data has been exchanged.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.7.2.1.7 snmpwalk -v2c -c public <target> ACC-LAPB::accHdlcRrPolling
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.7.2.1.7.1 snmpget -v2c -c public <target> ACC-LAPB::accHdlcRrPolling.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.7.2.1.7.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.7 | accLapb | ACC-LAPB |
| 1.3.6.1.4.1.5.1.1.7.2 | accLapbParmTable | ACC-LAPB |
| 1.3.6.1.4.1.5.1.1.7.2.1 | accLapbParmEntry | ACC-LAPB |
| 1.3.6.1.4.1.5.1.1.7.2.1.7 | accHdlcRrPolling | ACC-LAPB |