All MIBs › ACC-LAPB › accHdlcIdleFill
accHdlcIdleFill
Module: ACC-LAPB
OID (symbolic): ACC-LAPB::accHdlcIdleFill
OID (numeric): 1.3.6.1.4.1.5.1.1.7.2.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Fill between frames with flags or ones
What is accHdlcIdleFill?
This OID determines whether the device sends flag bytes (0x7E pattern) or mark bits (all 1-bits) during periods when there is no data to transmit. This affects clock recovery and synchronization on some equipment; consult your hardware specs and link partner configuration. Choosing flag fill ensures steady synchronization by sending continuous 0x7E bytes, while ones-fill sends continuous 1-bits instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.7.2.1.11 snmpwalk -v2c -c public <target> ACC-LAPB::accHdlcIdleFill
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.7.2.1.11.1 snmpget -v2c -c public <target> ACC-LAPB::accHdlcIdleFill.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.7.2.1.11.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accHdlcIdleFill.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.7 | accLapb | ACC-LAPB |
| 1.3.6.1.4.1.5.1.1.7.2 | accLapbParmTable | ACC-LAPB |
| 1.3.6.1.4.1.5.1.1.7.2.1 | accLapbParmEntry | ACC-LAPB |
| 1.3.6.1.4.1.5.1.1.7.2.1.11 | accHdlcIdleFill | ACC-LAPB |