All MIBs › ACC-IPX › accIpxRteFltrStatus
accIpxRteFltrStatus
Module: ACC-IPX
OID (symbolic): ACC-IPX::accIpxRteFltrStatus
OID (numeric): 1.3.6.1.4.1.5.1.1.22.9.3.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Writing 'invalid' has the effect of deleting this filter.
What is accIpxRteFltrStatus?
This OID controls whether an IPX route filter is active or inactive on the device. Network engineers use it to enable, disable, or delete routing filters that control which IPX network traffic can pass through the router. Setting this value to 'invalid' removes the filter entry entirely, for example when you no longer want to block traffic from a specific network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.9.3.1.4 snmpwalk -v2c -c public <target> ACC-IPX::accIpxRteFltrStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.9.3.1.4.1 snmpget -v2c -c public <target> ACC-IPX::accIpxRteFltrStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.22.9.3.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accIpxRteFltrStatus.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.22 | accIpx | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.9 | accIpxRouteFilters | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.9.3 | accIpxRteFltrTable | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.9.3.1 | accIpxRteFltrEntry | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.9.3.1.4 | accIpxRteFltrStatus | ACC-IPX |