All MIBs › ACC-IPX › accIpxRteFltrApplPktDir
accIpxRteFltrApplPktDir
Module: ACC-IPX
OID (symbolic): ACC-IPX::accIpxRteFltrApplPktDir
OID (numeric): 1.3.6.1.4.1.5.1.1.22.16.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
Traffic direction to which the IPX Route filter is applied
What is accIpxRteFltrApplPktDir?
This value specifies whether a route filter applies to incoming traffic, outgoing traffic, or both directions on an interface. You configure this to control whether your filter rules police traffic entering your network, leaving it, or in both directions. For example, setting this to inbound-only means the filter will only inspect packets arriving on that interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.16.3.1.2 snmpwalk -v2c -c public <target> ACC-IPX::accIpxRteFltrApplPktDir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.16.3.1.2.1 snmpget -v2c -c public <target> ACC-IPX::accIpxRteFltrApplPktDir.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.22 | accIpx | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.16 | accIpxNamedRteFilters | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.16.3 | accIpxRteFltrApplTable | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.16.3.1 | accIpxRteFltrApplEntry | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.16.3.1.2 | accIpxRteFltrApplPktDir | ACC-IPX |