All MIBs › ACC-IPX › accIpxNetX25InOutAddr
accIpxNetX25InOutAddr
Module: ACC-IPX
OID (symbolic): ACC-IPX::accIpxNetX25InOutAddr
OID (numeric): 1.3.6.1.4.1.5.1.1.22.2.1.11
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description:
X25 address to send to and to receive packets from. Object required in set PDU adding X25-type circuit
What is accIpxNetX25InOutAddr?
This OID specifies the X.25 packet-switching address where the router sends packets and from where it receives them. You must configure this when adding an X.25 WAN circuit to tell the router which public network address to use. An example value is "3141592653" which represents a complete X.25 address in that specific network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.2.1.11 snmpwalk -v2c -c public <target> ACC-IPX::accIpxNetX25InOutAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.2.1.11.1 snmpget -v2c -c public <target> ACC-IPX::accIpxNetX25InOutAddr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.22.2.1.11.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.22 | accIpx | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.2 | accIpxNetTable | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.2.1 | accIpxNetEntry | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.2.1.11 | accIpxNetX25InOutAddr | ACC-IPX |