All MIBs › ACC-IPX › accIpxNetRtgHldTmr
accIpxNetRtgHldTmr
Module: ACC-IPX
OID (symbolic): ACC-IPX::accIpxNetRtgHldTmr
OID (numeric): 1.3.6.1.4.1.5.1.1.22.2.1.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Demand RIP/SAP Hold timer
What is accIpxNetRtgHldTmr?
This OID sets the hold timer (1 to 255 seconds) that demand-based RIP/SAP routers wait before flushing a route learned over this link. Network designers use this to prevent routing flaps when a link is temporarily congested or slow to respond. A typical value of 120 seconds prevents routes from dropping out during brief slowdowns.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.2.1.22 snmpwalk -v2c -c public <target> ACC-IPX::accIpxNetRtgHldTmr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.2.1.22.1 snmpget -v2c -c public <target> ACC-IPX::accIpxNetRtgHldTmr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.22.2.1.22.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accIpxNetRtgHldTmr.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.22 | accIpx | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.2 | accIpxNetTable | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.2.1 | accIpxNetEntry | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.2.1.22 | accIpxNetRtgHldTmr | ACC-IPX |