All MIBs › ACC-IPX › accIpxNetAdStat
accIpxNetAdStat
Module: ACC-IPX
OID (symbolic): ACC-IPX::accIpxNetAdStat
OID (numeric): 1.3.6.1.4.1.5.1.1.22.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Administrative status of network Object will be defaulted if missing in set PDU which adds entries.
What is accIpxNetAdStat?
ACC-IPX::accIpxNetAdStat is a control switch that enables or disables IPX routing on a specific network segment attached to the router. Engineers use this to isolate segments during maintenance without disabling the entire router. Disabling it on one port stops all IPX traffic to that segment while keeping other networks active, useful for testing changes in isolation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.2.1.6 snmpwalk -v2c -c public <target> ACC-IPX::accIpxNetAdStat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.2.1.6.1 snmpget -v2c -c public <target> ACC-IPX::accIpxNetAdStat.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.22.2.1.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.22 | accIpx | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.2 | accIpxNetTable | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.2.1 | accIpxNetEntry | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.2.1.6 | accIpxNetAdStat | ACC-IPX |