All MIBs › ACC-IPX › accIpxMode
accIpxMode
Module: ACC-IPX
OID (symbolic): ACC-IPX::accIpxMode
OID (numeric): 1.3.6.1.4.1.5.1.1.22.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: RIP protocol type to use
What is accIpxMode?
ACC-IPX::accIpxMode selects which variant (version) of the IPX RIP routing protocol the system should use for advertising routes. Different network devices support different RIP implementations, so engineers must match this setting across the network to avoid routing mismatches. If you set this to "Cisco RIP" but upstream routers use "NetWare RIP," the networks won't learn each other's routes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.1.5 snmpwalk -v2c -c public <target> ACC-IPX::accIpxMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.22.1.5.1 snmpget -v2c -c public <target> ACC-IPX::accIpxMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.22.1.5.1 i <value>
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-IPX::accIpxMode OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5.1.1.22 | accIpx | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.1 | accIpxParms | ACC-IPX |
| 1.3.6.1.4.1.5.1.1.22.1.5 | accIpxMode | ACC-IPX |