All MIBs › ACC-IPFILTER › accIpIfFiltEditUDPTCPPort
accIpIfFiltEditUDPTCPPort
Module: ACC-IPFILTER
OID (symbolic): ACC-IPFILTER::accIpIfFiltEditUDPTCPPort
OID (numeric): 1.3.6.1.4.1.5.1.1.18.6.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The UDP or TCP port number to which the previous logical operation is to apply.
What is accIpIfFiltEditUDPTCPPort?
This OID stores the UDP or TCP port number (1-65535) that a filter rule applies to when being edited or created, before the rule is finalized. Network engineers use this to build port-specific security rules during configuration—for example, allowing SSH on port 22 but blocking all other administrative ports. A value of 443 would mean you're configuring a rule for HTTPS traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.6.1.12 snmpwalk -v2c -c public <target> ACC-IPFILTER::accIpIfFiltEditUDPTCPPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.6.1.12.1 snmpget -v2c -c public <target> ACC-IPFILTER::accIpIfFiltEditUDPTCPPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.18.6.1.12.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.18 | accIpFilter | ACC-IPFILTER |
| 1.3.6.1.4.1.5.1.1.18.6 | accIpIfFiltEditTable | ACC-IPFILTER |
| 1.3.6.1.4.1.5.1.1.18.6.1 | accIpIfFiltEditEntry | ACC-IPFILTER |
| 1.3.6.1.4.1.5.1.1.18.6.1.12 | accIpIfFiltEditUDPTCPPort | ACC-IPFILTER |