All MIBs › ACC-IPFILTER › accIpIfFiltDispPktDir
accIpIfFiltDispPktDir
Module: ACC-IPFILTER
OID (symbolic): ACC-IPFILTER::accIpIfFiltDispPktDir
OID (numeric): 1.3.6.1.4.1.5.1.1.18.5.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
Stream direction to which filter is applied. Input and Output require an interface to be specified. Global indicates all interfaces and both directions. Input and Global filters are applied prior to Output filters. NOTE: a packet originating in the router may not pass through the filter logic.
What is accIpIfFiltDispPktDir?
This read-only OID indicates the traffic direction the filter applies to: inbound (Input), outbound (Output), or both directions on all interfaces (Global). Network engineers review this to understand when filters are evaluated, since Input filters are checked before Output filters, and packets generated locally bypass the filter logic entirely. An example value is 'Input', meaning the filter checks all incoming traffic on the specified interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.5.1.2 snmpwalk -v2c -c public <target> ACC-IPFILTER::accIpIfFiltDispPktDir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.5.1.2.1 snmpget -v2c -c public <target> ACC-IPFILTER::accIpIfFiltDispPktDir.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.18 | accIpFilter | ACC-IPFILTER |
| 1.3.6.1.4.1.5.1.1.18.5 | accIpIfFiltDispTable | ACC-IPFILTER |
| 1.3.6.1.4.1.5.1.1.18.5.1 | accIpIfFiltDispEntry | ACC-IPFILTER |
| 1.3.6.1.4.1.5.1.1.18.5.1.2 | accIpIfFiltDispPktDir | ACC-IPFILTER |