ACC-IPFILTER :: accIpFiltSAddr

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-IPFILTERaccIpFiltSAddr

accIpFiltSAddr

Module: ACC-IPFILTER

OID (symbolic): ACC-IPFILTER::accIpFiltSAddr

OID (numeric): 1.3.6.1.4.1.5.1.1.18.2.1.3

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: Source Address

What is accIpFiltSAddr?

This OID stores the source IP address from which traffic is originating and should be filtered. Network engineers use this to block or prioritize traffic coming from specific hosts or networks—for instance, when you need to restrict access from a problematic source. An example value is 192.168.1.50, which means the filter rule applies only to packets with that specific source IP address.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.2.1.3
snmpwalk -v2c -c public <target> ACC-IPFILTER::accIpFiltSAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.2.1.3.1
snmpget -v2c -c public <target> ACC-IPFILTER::accIpFiltSAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.18.2.1.3.1 a <value>

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-IPFILTER::accIpFiltSAddr OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5.1.1.18accIpFilterACC-IPFILTER
1.3.6.1.4.1.5.1.1.18.2accIpFiltTableACC-IPFILTER
1.3.6.1.4.1.5.1.1.18.2.1accIpFiltEntryACC-IPFILTER
1.3.6.1.4.1.5.1.1.18.2.1.3accIpFiltSAddrACC-IPFILTER