ACC-IPFILTER :: accIpFiltDAddr

MIB Reference — IPNetwork Monitor · Updated September 13, 2026

All MIBsACC-IPFILTERaccIpFiltDAddr

accIpFiltDAddr

Module: ACC-IPFILTER

OID (symbolic): ACC-IPFILTER::accIpFiltDAddr

OID (numeric): 1.3.6.1.4.1.5.1.1.18.2.1.1

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: Destination Address

What is accIpFiltDAddr?

The ACC-IPFILTER::accIpFiltDAddr OID stores a destination IP address used as part of a filter rule to match or block certain traffic. A network engineer configures this to create access control policies that allow or deny traffic to specific destination addresses. For example, accIpFiltDAddr = 192.168.2.50 defines a filter rule targeting the host at 192.168.2.50.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.2.1.1
snmpwalk -v2c -c public <target> ACC-IPFILTER::accIpFiltDAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.18.2.1.1.1
snmpget -v2c -c public <target> ACC-IPFILTER::accIpFiltDAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.18.2.1.1.1 a <value>

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-IPFILTER::accIpFiltDAddr OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5.1.1.18accIpFilterACC-IPFILTER
1.3.6.1.4.1.5.1.1.18.2accIpFiltTableACC-IPFILTER
1.3.6.1.4.1.5.1.1.18.2.1accIpFiltEntryACC-IPFILTER
1.3.6.1.4.1.5.1.1.18.2.1.1accIpFiltDAddrACC-IPFILTER