All MIBs › ACC-FR › accFrParmAddrLen
accFrParmAddrLen
Module: ACC-FR
OID (symbolic): ACC-FR::accFrParmAddrLen
OID (numeric): 1.3.6.1.4.1.5.1.1.20.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Length of address on serial line
What is accFrParmAddrLen?
This OID specifies how many bytes (2 to 4) are used for Frame Relay addresses on the serial line, controlling the size of the DLCI field in each frame. Network engineers configure this during circuit setup to match the service provider's addressing scheme, as different providers may use 2-byte versus 4-byte address fields. A value of 2 means addresses use 2 bytes, while 4 means 4-byte addresses are used.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.3.1.3 snmpwalk -v2c -c public <target> ACC-FR::accFrParmAddrLen
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.3.1.3.1 snmpget -v2c -c public <target> ACC-FR::accFrParmAddrLen.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.20.3.1.3.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.20 | accFr | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.3 | accFrParmTable | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.3.1 | accFrParmEntry | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.3.1.3 | accFrParmAddrLen | ACC-FR |