All MIBs › ACC-FR › accFrIpAddress
accFrIpAddress
Module: ACC-FR
OID (symbolic): ACC-FR::accFrIpAddress
OID (numeric): 1.3.6.1.4.1.5.1.1.20.1.1.2
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description:
IP Address Object required in entry-adding SET PDU.
What is accFrIpAddress?
ACC-FR::accFrIpAddress holds an IP address that is being translated to a Frame Relay DLCI (Data Link Connection Identifier) so packets destined for that IP can be routed correctly over the Frame Relay network. This is essential when using Frame Relay because the underlying protocol uses DLCI numbers instead of IP addresses to identify virtual circuits. For instance, you might map IP address 192.168.1.5 to DLCI 100 to indicate that traffic for that IP should be sent through Frame Relay virtual circuit 100.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.1.1.2 snmpwalk -v2c -c public <target> ACC-FR::accFrIpAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.1.1.2.1 snmpget -v2c -c public <target> ACC-FR::accFrIpAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.20.1.1.2.1 a <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accFrIpAddress.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.20 | accFr | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.1 | accFrAtTable | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.1.1 | accFrAtEntry | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.1.1.2 | accFrIpAddress | ACC-FR |