accFrDLCI
Module: ACC-FR
OID (symbolic): ACC-FR::accFrDLCI
OID (numeric): 1.3.6.1.4.1.5.1.1.20.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Frame Relay DLCI to use for the specified host Object required in entry-adding SET PDU.
What is accFrDLCI?
ACC-FR::accFrDLCI specifies which Frame Relay DLCI (data link connection identifier) to use for reaching a particular remote host or network. A network engineer configures this as part of setting up Frame Relay connectivity, linking an IP destination with the virtual circuit number assigned by the service provider. For example, if your service provider assigns you DLCI 200 for a connection to a remote office, you would set this value to 200 for that office's IP subnet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.1.1.3 snmpwalk -v2c -c public <target> ACC-FR::accFrDLCI
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.1.1.3.1 snmpget -v2c -c public <target> ACC-FR::accFrDLCI.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.20.1.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accFrDLCI.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.20 | accFr | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.1 | accFrAtTable | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.1.1 | accFrAtEntry | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.1.1.3 | accFrDLCI | ACC-FR |