All MIBs › ACC-FR › accFrAtIfIndex
accFrAtIfIndex
Module: ACC-FR
OID (symbolic): ACC-FR::accFrAtIfIndex
OID (numeric): 1.3.6.1.4.1.5.1.1.20.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Interface number (ifIndex) for which this translation entry is valid. Object required in entry-adding SET PDU.
What is accFrAtIfIndex?
ACC-FR::accFrAtIfIndex stores an interface index number (as an integer) that identifies which Frame Relay port this address translation entry applies to. When configuring IP-to-DLCI mappings on a Frame Relay router, you must specify which physical or logical interface the mapping is for. For example, accFrAtIfIndex might be set to 5 to indicate this translation entry is active on Frame Relay interface port 5.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.1.1.1 snmpwalk -v2c -c public <target> ACC-FR::accFrAtIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.20.1.1.1.1 snmpget -v2c -c public <target> ACC-FR::accFrAtIfIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.20.1.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accFrAtIfIndex.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.20 | accFr | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.1 | accFrAtTable | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.1.1 | accFrAtEntry | ACC-FR |
| 1.3.6.1.4.1.5.1.1.20.1.1.1 | accFrAtIfIndex | ACC-FR |