All MIBs › ACC-ENET › accEthDuplex
accEthDuplex
Module: ACC-ENET
OID (symbolic): ACC-ENET::accEthDuplex
OID (numeric): 1.3.6.1.4.1.5.1.1.8.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The duplex options are: auto(1) half(2) full(3)
What is accEthDuplex?
This OID controls whether the Ethernet port operates in auto-negotiate (1), half-duplex (2), or full-duplex (3) mode. Engineers configure this to match the capabilities of connected devices, as duplex mismatches cause severe performance degradation. Setting it to 3 forces the port to full-duplex mode, allowing simultaneous bidirectional traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.8.2.1.4 snmpwalk -v2c -c public <target> ACC-ENET::accEthDuplex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.8.2.1.4.1 snmpget -v2c -c public <target> ACC-ENET::accEthDuplex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.8.2.1.4.1 i <value>
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-ENET::accEthDuplex OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5.1.1.8 | accEnet | ACC-ENET |
| 1.3.6.1.4.1.5.1.1.8.2 | accEnetParmTable | ACC-ENET |
| 1.3.6.1.4.1.5.1.1.8.2.1 | accEnetParmEntry | ACC-ENET |
| 1.3.6.1.4.1.5.1.1.8.2.1.4 | accEthDuplex | ACC-ENET |