All MIBs › ACC-ENET › accEnetStatJabberConds
accEnetStatJabberConds
Module: ACC-ENET
OID (symbolic): ACC-ENET::accEnetStatJabberConds
OID (numeric): 1.3.6.1.4.1.5.1.1.8.3.1.5
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description:
Number of jabber conditions detected.
What is accEnetStatJabberConds?
This OID counts jabber conditions, which occur when a device transmits frames longer than the Ethernet maximum (usually over 1518 bytes), typically caused by hardware defects. Seeing jabber conditions means a connected device has a faulty Ethernet chip and is sending malformed packets that could disrupt the network. For example, any non-zero value in this counter points to a specific device that needs repair or replacement.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.8.3.1.5 snmpwalk -v2c -c public <target> ACC-ENET::accEnetStatJabberConds
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.8.3.1.5.1 snmpget -v2c -c public <target> ACC-ENET::accEnetStatJabberConds.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.8 | accEnet | ACC-ENET |
| 1.3.6.1.4.1.5.1.1.8.3 | accEnetStatTable | ACC-ENET |
| 1.3.6.1.4.1.5.1.1.8.3.1 | accEnetStatEntry | ACC-ENET |
| 1.3.6.1.4.1.5.1.1.8.3.1.5 | accEnetStatJabberConds | ACC-ENET |