All MIBs › ACC-ENET › accEnetStatAlignErrs
accEnetStatAlignErrs
Module: ACC-ENET
OID (symbolic): ACC-ENET::accEnetStatAlignErrs
OID (numeric): 1.3.6.1.4.1.5.1.1.8.3.1.3
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description: Number of alignment errors detected.
What is accEnetStatAlignErrs?
This OID is a counter measuring how many frames arrived with incorrect byte alignment on the Ethernet port. Alignment errors typically stem from hardware faults, duplex mismatches, or old/damaged cables, and usually occur alongside CRC errors. For example, if this counter increases daily despite low traffic, the port likely has a duplex mismatch or failing hardware.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.8.3.1.3 snmpwalk -v2c -c public <target> ACC-ENET::accEnetStatAlignErrs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.8.3.1.3.1 snmpget -v2c -c public <target> ACC-ENET::accEnetStatAlignErrs.1
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-ENET::accEnetStatAlignErrs OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5.1.1.8 | accEnet | ACC-ENET |
| 1.3.6.1.4.1.5.1.1.8.3 | accEnetStatTable | ACC-ENET |
| 1.3.6.1.4.1.5.1.1.8.3.1 | accEnetStatEntry | ACC-ENET |
| 1.3.6.1.4.1.5.1.1.8.3.1.3 | accEnetStatAlignErrs | ACC-ENET |