All MIBs › ACC-DS1 › accDs1ExtSignalMode
accDs1ExtSignalMode
Module: ACC-DS1
OID (symbolic): ACC-DS1::accDs1ExtSignalMode
OID (numeric): 1.3.6.1.4.1.5.1.1.42.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Signaling mode for this DS1 interface
What is accDs1ExtSignalMode?
This OID sets the type of signaling protocol used on the DS1 interface, such as CAS (Channel Associated Signaling) or CCS (Common Channel Signaling). You configure this to match the signaling requirements of your carrier or network design. For example, setting it to CAS mode means each voice channel carries its own signaling information in stolen bits.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.42.1.11 snmpwalk -v2c -c public <target> ACC-DS1::accDs1ExtSignalMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.42.1.11.1 snmpget -v2c -c public <target> ACC-DS1::accDs1ExtSignalMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.42.1.11.1 i <value>
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-DS1::accDs1ExtSignalMode OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5.1.1.42 | accDs1ExtTable | ACC-DS1 |
| 1.3.6.1.4.1.5.1.1.42.1 | accDs1ExtEntry | ACC-DS1 |
| 1.3.6.1.4.1.5.1.1.42.1.11 | accDs1ExtSignalMode | ACC-DS1 |