ACC-DS1 :: accDs1ExtCICBase

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › ACC-DS1 › accDs1ExtCICBase

accDs1ExtCICBase

Module: ACC-DS1

OID (symbolic): ACC-DS1::accDs1ExtCICBase

OID (numeric): 1.3.6.1.4.1.5.1.1.42.1.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: CIC base to use for circuits on this DS1 interface.

What is accDs1ExtCICBase?

This OID specifies the starting Circuit Identification Code (CIC) for circuits running on this DS1 interface. CICs are numeric identifiers used by the signaling protocol to uniquely identify each circuit across the network. For example, setting this to 97 means the first circuit gets CIC 97, the second gets 98, and so on, allowing the remote switch to identify which voice channel you're talking about.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.42.1.12
snmpwalk -v2c -c public <target> ACC-DS1::accDs1ExtCICBase

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.42.1.12.1
snmpget -v2c -c public <target> ACC-DS1::accDs1ExtCICBase.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.42.1.12.1 i <value>

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ACC-DS1::accDs1ExtCICBase OID value, configure state conditions and alerts, and monitor any ACC/Ericsson WAN access routers (legacy) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5accACC-MIB
1.3.6.1.4.1.5.1accSBARACC-MIB
1.3.6.1.4.1.5.1.1accBRGACC-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5.1.1.42accDs1ExtTableACC-DS1
1.3.6.1.4.1.5.1.1.42.1accDs1ExtEntryACC-DS1
1.3.6.1.4.1.5.1.1.42.1.12accDs1ExtCICBaseACC-DS1