All MIBs › ACC-COMPRESS › accCompressX25StatAvgCompIn
accCompressX25StatAvgCompIn
Module: ACC-COMPRESS
OID (symbolic): ACC-COMPRESS::accCompressX25StatAvgCompIn
OID (numeric): 1.3.6.1.4.1.5.1.1.6.6.1.10
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description:
The average compression rate of packets presented for decompression expressed as a percentage between 0 and 100. 100% is the unattainable rate which could only be achieved by compressing all packets to zero bits.
What is accCompressX25StatAvgCompIn?
This OID shows the average compression ratio for X.25 inbound traffic as a percentage, where lower numbers mean better compression. Network engineers use this as a quick health check to ensure the decompressor is working and that incoming data is actually being reduced in size. A value of 45% means inbound X.25 traffic is being decompressed to 45% of its compressed size, achieving a 55% space saving.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.6.6.1.10 snmpwalk -v2c -c public <target> ACC-COMPRESS::accCompressX25StatAvgCompIn
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.6.6.1.10.1 snmpget -v2c -c public <target> ACC-COMPRESS::accCompressX25StatAvgCompIn.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.6 | accCompress | ACC-COMPRESS |
| 1.3.6.1.4.1.5.1.1.6.6 | accCompressX25StatTable | ACC-COMPRESS |
| 1.3.6.1.4.1.5.1.1.6.6.1 | accCompressX25StatEntry | ACC-COMPRESS |
| 1.3.6.1.4.1.5.1.1.6.6.1.10 | accCompressX25StatAvgCompIn | ACC-COMPRESS |