All MIBs › ACC-AT › accAtPortStatsNotForMes
accAtPortStatsNotForMes
Module: ACC-AT
OID (symbolic): ACC-AT::accAtPortStatsNotForMes
OID (numeric): 1.3.6.1.4.1.5.1.1.28.8.1.3
Node type: OBJECT-TYPE
Type: Counter
Access: read-only
Description:
The number of Phase 1 unicast packets received with a LLAP header whose destination node id did not match that of the receiving port.
What is accAtPortStatsNotForMes?
This OID counts Phase 1 unicast packets with an LLAP header whose destination node ID didn't match the receiving port—essentially packets that arrived but weren't meant for this port. You check this to identify misconfigured addressing or nodes sending traffic to the wrong segment. If this count is high, it could indicate a routing loop or address assignment error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.8.1.3 snmpwalk -v2c -c public <target> ACC-AT::accAtPortStatsNotForMes
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.8.1.3.1 snmpget -v2c -c public <target> ACC-AT::accAtPortStatsNotForMes.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.28 | accAt | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.8 | accAtPortStatsTable | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.8.1 | accAtPortStatsEntry | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.8.1.3 | accAtPortStatsNotForMes | ACC-AT |