All MIBs › ACC-AT › accAtNodeFfrRouting
accAtNodeFfrRouting
Module: ACC-AT
OID (symbolic): ACC-AT::accAtNodeFfrRouting
OID (numeric): 1.3.6.1.4.1.5.1.1.28.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object indicates whether appletalk uses a half (ACC) or full (Cisco) router model for frame relay.
What is accAtNodeFfrRouting?
This OID selects which routing model the device uses for AppleTalk over Frame Relay circuits: a half-router model (ACC brand) or a full-router model (Cisco). Different Frame Relay providers and devices expect specific routing behaviors, and this setting controls which standard the device follows. If your Frame Relay provider requires Cisco-style routing, you would set this OID to the Cisco mode; if they require ACC-style half routing, you would set it to ACC.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.1.4 snmpwalk -v2c -c public <target> ACC-AT::accAtNodeFfrRouting
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.1.4.1 snmpget -v2c -c public <target> ACC-AT::accAtNodeFfrRouting.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.28.1.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accAtNodeFfrRouting.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.28 | accAt | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.1 | accAtNode | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.1.4 | accAtNodeFfrRouting | ACC-AT |