All MIBs › ACC-AT › accAtNetTabX25Addr2
accAtNetTabX25Addr2
Module: ACC-AT
OID (symbolic): ACC-AT::accAtNetTabX25Addr2
OID (numeric): 1.3.6.1.4.1.5.1.1.28.6.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description:
An alternate DTE address to use for receiving packets via an X.25 virtual circuit.
What is accAtNetTabX25Addr2?
This setting stores a backup X.25 network address for receiving packets if the primary address is unavailable, providing redundancy for X.25 virtual circuit connectivity. You configure this when your X.25 service provider assigns multiple addresses for failover capability or load balancing. For example, setting this to '987654321' allows the port to accept incoming X.25 connections on a secondary address if the primary becomes unreachable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.6.1.5 snmpwalk -v2c -c public <target> ACC-AT::accAtNetTabX25Addr2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.6.1.5.1 snmpget -v2c -c public <target> ACC-AT::accAtNetTabX25Addr2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.28.6.1.5.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accAtNetTabX25Addr2.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.28 | accAt | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.6 | accAtNetTable | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.6.1 | accAtNetEntry | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.6.1.5 | accAtNetTabX25Addr2 | ACC-AT |