All MIBs › ACC-AT › accAtForwardFilterStatus
accAtForwardFilterStatus
Module: ACC-AT
OID (symbolic): ACC-AT::accAtForwardFilterStatus
OID (numeric): 1.3.6.1.4.1.5.1.1.28.17.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Writing 'invalid' deletes the filter table entry.
What is accAtForwardFilterStatus?
ACC-AT::accAtForwardFilterStatus is a control field that manages the filter entry lifecycle, allowing activation or deletion by setting it to valid or invalid states. A network engineer uses this to enable/disable filters dynamically without deleting the entire configuration entry. For example, setting this to "invalid" removes the filter rule from the active forwarding table, effectively disabling traffic control for those parameters.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.17.1.9 snmpwalk -v2c -c public <target> ACC-AT::accAtForwardFilterStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.17.1.9.1 snmpget -v2c -c public <target> ACC-AT::accAtForwardFilterStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.28.17.1.9.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> accAtForwardFilterStatus.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.28 | accAt | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.17 | accAtForwardFilterTable | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.17.1 | accAtForwardFilterEntry | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.17.1.9 | accAtForwardFilterStatus | ACC-AT |