All MIBs › ACC-AT › accAtForwardFilterFromMin
accAtForwardFilterFromMin
Module: ACC-AT
OID (symbolic): ACC-AT::accAtForwardFilterFromMin
OID (numeric): 1.3.6.1.4.1.5.1.1.28.17.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description:
The least value in the source network address range.
What is accAtForwardFilterFromMin?
ACC-AT::accAtForwardFilterFromMin defines the minimum source network address (a 2-byte value) that this forwarding filter applies to. A network engineer uses this to filter traffic based on where packets originate, allowing fine-grained control over which AppleTalk segments can communicate. For example, setting this to 0x0001 means the filter examines packets from source network 1 and higher.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.17.1.3 snmpwalk -v2c -c public <target> ACC-AT::accAtForwardFilterFromMin
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5.1.1.28.17.1.3.1 snmpget -v2c -c public <target> ACC-AT::accAtForwardFilterFromMin.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5.1.1.28.17.1.3.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5 | acc | ACC-MIB |
| 1.3.6.1.4.1.5.1 | accSBAR | ACC-MIB |
| 1.3.6.1.4.1.5.1.1 | accBRG | ACC-MIB |
| 1.3.6.1.4.1.5.1.1.28 | accAt | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.17 | accAtForwardFilterTable | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.17.1 | accAtForwardFilterEntry | ACC-AT |
| 1.3.6.1.4.1.5.1.1.28.17.1.3 | accAtForwardFilterFromMin | ACC-AT |