All MIBs › A3COM00352-STACK-CONFIG › stackUnitManagementType
stackUnitManagementType
Module: A3COM00352-STACK-CONFIG
OID (symbolic): A3COM00352-STACK-CONFIG::stackUnitManagementType
OID (numeric): 1.3.6.1.4.1.43.10.27.1.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object can be used to determine the management method used to access the agent in this unit. The options are:
unknown: The unit has not reported any management capability. It is either faulty or a non-conformant device. distributed: This unit can be managed using the SuperStackII distributed management architecture and so is managed through this agent. The unit may or may not have an active comms stack. If it has then the addresses for that agent can be determined from the address table. intelligent: The unit has its own SNMP agent which is accessed seperately. The agent is not part of the SSII distributed management architecture.
What is stackUnitManagementType?
Indicates how the unit can be managed: 'distributed' (via SuperStack II distributed management) or 'unknown' (faulty or non-conformant). This determines whether SNMP agents can reach the unit through this master or if it requires direct management. Distributed units integrate seamlessly into the stack's management architecture.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.27.1.1.1.8 snmpwalk -v2c -c public <target> A3COM00352-STACK-CONFIG::stackUnitManagementType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.27.1.1.1.8.1 snmpget -v2c -c public <target> A3COM00352-STACK-CONFIG::stackUnitManagementType.1
Start monitoring Legacy 3Com stackable switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM00352-STACK-CONFIG::stackUnitManagementType OID value, configure state conditions and alerts, and monitor any Legacy 3Com stackable switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.10 | generic | A3Com-products-MIB |
| 1.3.6.1.4.1.43.10.27 | superStackIIconfig | A3COM0004-GENERIC |
| 1.3.6.1.4.1.43.10.27.1 | stackConfiguration | A3COM0017-STACK-CONFIG |
| 1.3.6.1.4.1.43.10.27.1.1 | stackConfigTable | A3COM0017-STACK-CONFIG |
| 1.3.6.1.4.1.43.10.27.1.1.1 | stackConfigEntry | A3COM0017-STACK-CONFIG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.10.27.1.1.1.8 | stackUnitManagementType | A3COM00352-STACK-CONFIG |