A3COM0017-STACK-CONFIG :: stackUnitSlipMgmtInterface

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › A3COM0017-STACK-CONFIG › stackUnitSlipMgmtInterface

stackUnitSlipMgmtInterface

Module: A3COM0017-STACK-CONFIG

OID (symbolic): A3COM0017-STACK-CONFIG::stackUnitSlipMgmtInterface

OID (numeric): 1.3.6.1.4.1.43.10.27.1.1.1.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object (stackUnitManagementType = 'distributed'). The object points to the entry in the interface table which represents the potential SLIP (serial port) management interface for this unit. That is the index to use in the extIfTable for this device. Note that if the value of this object is zero, or the result of reading this object is NO-SUCH-NAME then there is no SLIP access port available on that unit.

What is stackUnitSlipMgmtInterface?

This OID points to the serial port (SLIP) interface index for out-of-band management on the unit. Network managers reference this to establish console access over serial for units with out-of-band needs. A value like 5 indexes the serial interface; zero indicates no SLIP management available.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.27.1.1.1.17
snmpwalk -v2c -c public <target> A3COM0017-STACK-CONFIG::stackUnitSlipMgmtInterface

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.27.1.1.1.17.1
snmpget -v2c -c public <target> A3COM0017-STACK-CONFIG::stackUnitSlipMgmtInterface.1

Start monitoring Legacy 3Com stackable switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0017-STACK-CONFIG::stackUnitSlipMgmtInterface OID value, configure state conditions and alerts, and monitor any Legacy 3Com stackable switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-AUDL-R1-MIB
1.3.6.1.4.1.43.10genericA3Com-products-MIB
1.3.6.1.4.1.43.10.27superStackIIconfigA3COM0004-GENERIC
Numeric OIDNameModule
1.3.6.1.4.1.43.10.27.1stackConfigurationA3COM0017-STACK-CONFIG
1.3.6.1.4.1.43.10.27.1.1stackConfigTableA3COM0017-STACK-CONFIG
1.3.6.1.4.1.43.10.27.1.1.1stackConfigEntryA3COM0017-STACK-CONFIG
1.3.6.1.4.1.43.10.27.1.1.1.17stackUnitSlipMgmtInterfaceA3COM0017-STACK-CONFIG