A3COM0017-STACK-CONFIG :: stackUnitManagementType

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › A3COM0017-STACK-CONFIG › stackUnitManagementType

stackUnitManagementType

Module: A3COM0017-STACK-CONFIG

OID (symbolic): A3COM0017-STACK-CONFIG::stackUnitManagementType

OID (numeric): 1.3.6.1.4.1.43.10.27.1.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object can be used to determine the management method used to access the agent in this unit. The options are:

unknown: The unit has not reported any management capability. It is either faulty or a non-conformant device. distributed: This unit can be managed using the SuperStackII distributed management architecture and so is managed through this agent. The unit may or may not have an active comms stack. If it has then the addresses for that agent can be determined from the address table. intelligent: The unit has its own SNMP agent which is accessed seperately. The agent is not part of the SSII distributed management architecture.

What is stackUnitManagementType?

Describes how the unit can be managed: unknown, distributed (via the stack agent), or standalone. This determines which management channel to use for that unit. Example: 'distributed' means the unit is managed through the stack's central agent, not directly via its own IP.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.10.27.1.1.1.8
snmpwalk -v2c -c public <target> A3COM0017-STACK-CONFIG::stackUnitManagementType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.10.27.1.1.1.8.1
snmpget -v2c -c public <target> A3COM0017-STACK-CONFIG::stackUnitManagementType.1

Start monitoring Legacy 3Com stackable switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM0017-STACK-CONFIG::stackUnitManagementType OID value, configure state conditions and alerts, and monitor any Legacy 3Com stackable switches from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-AUDL-R1-MIB
1.3.6.1.4.1.43.10genericA3Com-products-MIB
1.3.6.1.4.1.43.10.27superStackIIconfigA3COM0004-GENERIC
Numeric OIDNameModule
1.3.6.1.4.1.43.10.27.1stackConfigurationA3COM0017-STACK-CONFIG
1.3.6.1.4.1.43.10.27.1.1stackConfigTableA3COM0017-STACK-CONFIG
1.3.6.1.4.1.43.10.27.1.1.1stackConfigEntryA3COM0017-STACK-CONFIG
1.3.6.1.4.1.43.10.27.1.1.1.8stackUnitManagementTypeA3COM0017-STACK-CONFIG