All MIBs › A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB › a3ComRoutePolicyIpIfRowStatus
a3ComRoutePolicyIpIfRowStatus
Module: A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB
OID (symbolic): A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB::a3ComRoutePolicyIpIfRowStatus
OID (numeric): 1.3.6.1.4.1.43.29.4.23.3.1.3
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: The status column for an ip interface of a routing policy. This object can be set to: createAndGo(4), destroy(6)
The following values may be read: active(1)
A new ip interface entry in this table is created by setting this object to createAndGo(4), indexed by the id of an existing a3ComRoutePolicyEntry and the address of an existing ip interface at the device being managed. An error will be returned if any of the fields listed above contain invalid value. Once created successfully, this entry will automatically be made active(1). An entry in this table is deleted in similar way, except that the value set is destroy(6) instead of createAndGo(4). If a new entry, for instance, was to be created in this table for the policy 2 with ip interface address of 158.101.112.205, this object would be set to createAndGo(4) with the oid a3ComRoutePolicyIpIfRowStatus.3.158.101.112.205
What is a3ComRoutePolicyIpIfRowStatus?
Read-write control used to create (createAndGo) or remove (destroy) an IP interface entry within a routing policy, and reports whether that entry is currently active.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.23.3.1.3 snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB::a3ComRoutePolicyIpIfRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.23.3.1.3.1 snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB::a3ComRoutePolicyIpIfRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.23.3.1.3.1 s <value>
Start monitoring 3Com SuperStack Layer-3 switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB::a3ComRoutePolicyIpIfRowStatus OID value, configure state conditions and alerts, and monitor any 3Com SuperStack Layer-3 switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.29 | switchingSystemsMibs | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4 | a3ComSwitchingSystemsMib | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.29.4.23 | a3ComRoutePolicy | A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB |
| 1.3.6.1.4.1.43.29.4.23.3 | a3ComRoutePolicyIpIfTable | A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB |
| 1.3.6.1.4.1.43.29.4.23.3.1 | a3ComRoutePolicyIpIfEntry | A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB |
| 1.3.6.1.4.1.43.29.4.23.3.1.3 | a3ComRoutePolicyIpIfRowStatus | A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB |