A3COM-RIP-IPEXTNS-R4-MIB :: a3RipIpTriggerCtl

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-RIP-IPEXTNS-R4-MIBa3RipIpTriggerCtl

a3RipIpTriggerCtl

Module: A3COM-RIP-IPEXTNS-R4-MIB

OID (symbolic): A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpTriggerCtl

OID (numeric): 1.3.6.1.4.1.43.2.8.2.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This parameter determines if RIP-IP sends trigger update packets. Trigger update packets are sent when a route's metric has changed. By sending these update packets, RIP does not need to wait for the update interval, allowing earlier notification that a route's metric has changed.

What is a3RipIpTriggerCtl?

This OID enables trigger updates, which announce route metric changes immediately without waiting for the normal interval. Engineers enable this to accelerate convergence when critical routes fail, reducing outage duration. Trigger updates consume bandwidth but improve recovery speed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.8.2.1.6
snmpwalk -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpTriggerCtl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.8.2.1.6.1
snmpget -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpTriggerCtl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.8.2.1.6.1 i <value>

Start monitoring Legacy 3Com routers and L3 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpTriggerCtl OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers and L3 switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.8a3ComRipIpA3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.2a3RipIpCtlTableA3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.2.1a3RipIpCtlEntryA3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.2.1.6a3RipIpTriggerCtlA3COM-RIP-IPEXTNS-R4-MIB