A3COM-RIP-IPEXTNS-R4-MIB :: a3RipIpStaPolPort

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsA3COM-RIP-IPEXTNS-R4-MIBa3RipIpStaPolPort

a3RipIpStaPolPort

Module: A3COM-RIP-IPEXTNS-R4-MIB

OID (symbolic): A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolPort

OID (numeric): 1.3.6.1.4.1.43.2.8.7.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This defines the port to which this entry applies.

What is a3RipIpStaPolPort?

This integer identifies the interface port affected by a static route policy entry. Operators apply static-route-specific policies per port to control which locally-configured static routes are advertised out. Port 3 might have different static route filtering than port 1.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.8.7.1.1
snmpwalk -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolPort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.8.7.1.1.1
snmpget -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolPort.1

Start monitoring Legacy 3Com routers and L3 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolPort OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers and L3 switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.8a3ComRipIpA3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.7a3RipIpStaPolTableA3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.7.1a3RipIpStaPolEntryA3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.7.1.1a3RipIpStaPolPortA3COM-RIP-IPEXTNS-R4-MIB