All MIBs › A3COM-RIP-IPEXTNS-R4-MIB › a3RipIpStaPolMetric
a3RipIpStaPolMetric
Module: A3COM-RIP-IPEXTNS-R4-MIB
OID (symbolic): A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolMetric
OID (numeric): 1.3.6.1.4.1.43.2.8.7.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The metric that is to be used in RIP reports of this route. It a metric value in the range of 1 to 15 is specified, the route, together with the specified metric, is reported. If the metric 0 is specified, the routing table metric is calculated according to the formula defined in a3RipIpImpMetTable (for static entries). (all fractions are rounded down to the next integer)
What is a3RipIpStaPolMetric?
This integer (0-15) assigns a RIP metric to a static route when advertising it, or uses a calculated formula if set to 0. Operators adjust this to make static routes more or less preferred than learned routes. A value of 3 advertises that static path with relatively good cost.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.8.7.1.3 snmpwalk -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolMetric
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.8.7.1.3.1 snmpget -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolMetric.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.8.7.1.3.1 i <value>
Start monitoring Legacy 3Com routers and L3 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolMetric OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers and L3 switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.8 | a3ComRipIp | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.7 | a3RipIpStaPolTable | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.7.1 | a3RipIpStaPolEntry | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.7.1.3 | a3RipIpStaPolMetric | A3COM-RIP-IPEXTNS-R4-MIB |