All MIBs › A3COM-RIP-IPEXTNS-R4-MIB › a3RipIpStaPolCtl
a3RipIpStaPolCtl
Module: A3COM-RIP-IPEXTNS-R4-MIB
OID (symbolic): A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolCtl
OID (numeric): 1.3.6.1.4.1.43.2.8.2.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter is used to filter the reporting of static routes. It allows control over which static RIP routes are reported.
If this is set to all (1), all static routes are reported, provided those routes are allowed to be reported by a3RipIpNetPolCtl/Table. The metric that will be stored in the routing table in this case is specified by a3RipIpStaPolAllMet.
If this is set to none (2), none of the static routes are reported.
If this is set to include (3), static routes to destinations listed in a3RipIpStaPolTable are reported.
If this is set to exclude (4), all routes are reported except those listed in a3RipIpStaPolTable.
(note, in all these cases, Network Policy must be passed before this policy is applied).
If this objects gets changed from include to exclude, or from exclude to include, all existing entries will be flushed from the table.
What is a3RipIpStaPolCtl?
This integer control filters which static routes (manually configured routes) are advertised via RIP. A value of 1 allows all static routes to be shared with neighbors. An engineer uses this to control whether internal administrative routes propagate across the RIP domain.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.8.2.1.12 snmpwalk -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolCtl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.8.2.1.12.1 snmpget -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolCtl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.8.2.1.12.1 i <value>
Start monitoring Legacy 3Com routers and L3 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpStaPolCtl OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers and L3 switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.8 | a3ComRipIp | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.2 | a3RipIpCtlTable | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.2.1 | a3RipIpCtlEntry | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.2.1.12 | a3RipIpStaPolCtl | A3COM-RIP-IPEXTNS-R4-MIB |