All MIBs › A3COM-RIP-IPEXTNS-R4-MIB › a3RipIpRcvPolCtl
a3RipIpRcvPolCtl
Module: A3COM-RIP-IPEXTNS-R4-MIB
OID (symbolic): A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpRcvPolCtl
OID (numeric): 1.3.6.1.4.1.43.2.8.2.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This parameter is used to filter routing updates from trusted neighbors. It allows control over which RIP routes are received and stored in the routing table.
If this is set to all (1), all routes reported by trusted neighbors are received and stored in the routing table. The metric that will be stored in the routing table in this case is specified by a3RipIpRcvPolAllMet.
If this is set to none (2), none of the routes are received or stored in the routing table.
If this is set to include (3), routes to destinations listed in a3RipIpRcvPolTable are received and stored.
If this is set to exclude (4), all routes are received and stored except those listed in a3RipIpRcvPolTable.
If this objects gets changed from include to exclude, or from exclude to include, all existing entries will be flushed from the table.
What is a3RipIpRcvPolCtl?
This is an integer control that determines whether all routes from trusted RIP neighbors are accepted into the routing table. It filters incoming routing updates based on trust relationships. A setting of 1 (all routes accepted) means the device receives every route reported by trusted neighbors and stores their metrics directly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.8.2.1.11 snmpwalk -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpRcvPolCtl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.8.2.1.11.1 snmpget -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpRcvPolCtl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.8.2.1.11.1 i <value>
Start monitoring Legacy 3Com routers and L3 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpRcvPolCtl OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers and L3 switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.8 | a3ComRipIp | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.2 | a3RipIpCtlTable | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.2.1 | a3RipIpCtlEntry | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.2.1.11 | a3RipIpRcvPolCtl | A3COM-RIP-IPEXTNS-R4-MIB |