A3COM-RIP-IPEXTNS-R4-MIB :: a3RipIpNeighborAddr

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBs › A3COM-RIP-IPEXTNS-R4-MIB › a3RipIpNeighborAddr

a3RipIpNeighborAddr

Module: A3COM-RIP-IPEXTNS-R4-MIB

OID (symbolic): A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpNeighborAddr

OID (numeric): 1.3.6.1.4.1.43.2.8.8.1.2

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-only

Description: This specifies the IP address of the RIP-IP neighbor.

What is a3RipIpNeighborAddr?

This IP address identifies a neighboring router that participates in RIP routing exchanges. Administrators configure this to establish which routers to trust for routing updates. A typical value like 10.0.0.1 represents a peer on the local network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.8.8.1.2
snmpwalk -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpNeighborAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.8.8.1.2.1
snmpget -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpNeighborAddr.1

Start monitoring Legacy 3Com routers and L3 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpNeighborAddr OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers and L3 switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.43a3ComA3COM-BRIDGE-R3-MIB
1.3.6.1.4.1.43.2brouterMIBA3COM-BRIDGE-R3-MIB
Numeric OIDNameModule
1.3.6.1.4.1.43.2.8a3ComRipIpA3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.8a3RipIpNeighborTableA3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.8.1a3RipIpNeighborEntryA3COM-RIP-IPEXTNS-R4-MIB
1.3.6.1.4.1.43.2.8.8.1.2a3RipIpNeighborAddrA3COM-RIP-IPEXTNS-R4-MIB

Module

This MIB depends on