All MIBs › A3COM-RIP-IPEXTNS-R4-MIB › a3RipIpIntPolMetric
a3RipIpIntPolMetric
Module: A3COM-RIP-IPEXTNS-R4-MIB
OID (symbolic): A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolMetric
OID (numeric): 1.3.6.1.4.1.43.2.8.4.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The metric that is to be used in RIP reports of this route. It a metric value in the range of 1 to 15 is specified, the route, together with the specified metric, is reported. If the metric 0 is specified, the routing table metric is calculated according to the formula defined in a3RipIpImpMetTable (for either OSPF or IISIS). (all fractions are rounded down to the next integer)
What is a3RipIpIntPolMetric?
This integer (0–15) sets the RIP metric advertised for this specific interior route. A value of 0 auto-calculates per the formula; 1–15 override. Controls cost adjustment of IGP routes before advertising to RIP neighbors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.2.8.4.1.3 snmpwalk -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolMetric
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.2.8.4.1.3.1 snmpget -v2c -c public <target> A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolMetric.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.2.8.4.1.3.1 i <value>
Start monitoring Legacy 3Com routers and L3 switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-RIP-IPEXTNS-R4-MIB::a3RipIpIntPolMetric OID value, configure state conditions and alerts, and monitor any Legacy 3Com routers and L3 switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.2 | brouterMIB | A3COM-BRIDGE-R3-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.2.8 | a3ComRipIp | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.4 | a3RipIpIntPolTable | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.4.1 | a3RipIpIntPolEntry | A3COM-RIP-IPEXTNS-R4-MIB |
| 1.3.6.1.4.1.43.2.8.4.1.3 | a3RipIpIntPolMetric | A3COM-RIP-IPEXTNS-R4-MIB |